Each module has terminals under two side covers that can be unscrewed. It is possible to completely remove the ribbon cable and install your own voltage harness with ring terminals to make wiring a BMS easier. Battery is built in a 12s2p configuration. You can also break the module down and rearrange it to whatever voltage you would prefer with little modification. These modules are used, they were removed from hybrid busses. Battery terminals are on top and very easy to connect to, fins are on the opposite side of the terminals and are for heat dissipation, if the modules get warm, you can blow air over them for accelerated cooling.
We have cycle tested several modules and have found they come back as 30-31Ah, nearly full health.
Module Specifications:
CELL SPECIFICATIONS
Shipping: Free – the cost of shipping to you is included with your purchase.
Reviews
There are no reviews yet.