More Info:
This is a server rack mount LG ESS module. We have approximately 150 of these so if you are looking for a large 48V system, these are a good candidate to parallel together. The BMS wiring is shown in the pictures, very easy to either modify for your BMS or replace completely with a new harness. The pack is made of modules that are 2S3P. There are 7 of those modules in series to get 14S3P, making it a exceptional 48V battery bank. If you needed fewer cells in series, the modules come apart quite easily, there is no glue or epoxy holding the cells down, just long bolts.
There is a fuse installed behind the terminals, it is rated for 300 amps. I would say that is peak and keep the continuous below 150A.
Shipping will need to be freight due to the pack size. We can ship this pack to one of our locations for local pick up for $250, or ship to a commercial address or freight hub near you for $350. Shipping cost is for up to 12 modules. Residential freight delivery is possible for an additional charge, contact us for a quote.
Module Info
Configuration: 14S3P
Max Voltage: 58.8V
Nominal Voltage: 51.8V
Minimum Voltage: 42V
Continuous Discharge: 66A*
Continuous Charge: 66A*
*This current rating was what the 1000V battery pack was expecting to be the maximum, the battery itself is fused for 300A.
Cell Info
Max Voltage: 4.2V
Nominal Voltage: 3.7V
Minimum Voltage: 3V
Module Size
Length to Mounting Point: 32 inches
Total Length: 33 inches
Width: 17.5 inches
Width with mounting ears: 19 inches
Height: 4 1/2 inches
Weight: 144 lb
Reviews
There are no reviews yet.