| LG Chem | LG Chem | Manufacturer | Samsung | Samsung |
|---|---|---|---|---|
| LGGBMH11865 | LGDBM361865 | Cell Model Number | INR18650M36 | INR18650-35E |
| 3,200mAh | 3,440mAh | Nominal Capacity | 3,600mAh | 3,500mAh |
| 4.2V | 4.2V | Max Voltage | 4.2V | 4.2V |
| 3.67V | 3.63V | Nominal Voltage | 3.63V | 3.6V |
| 2.5V | 2.5V | Minimum Voltage | 2.5V | 2.65V |
| Undefined | 0.67A | Max Discharge Current -30C - -20C | 0.67A | Undefined |
| 10A | 1A | Max Discharge Current -20C - 5C | 1A | 8A |
| 10A | 5A | Max Discharge Current 5C - 45C | 5A | 13A |
| 10A | 5A | Max Discharge Current 45 - 60C | 5A | Undefined |
| 1A | 1A | Max Charge Current 0C - 24C | 1A | 1.7A |
| 3.1A | 2.33A | Max Charge Current 25C - 50C | 2.33A | 2A |
| Module Info | ||||
| 3kW | 3.1kWh | Energy | 3.33kWh | 3.17kW |
| 115.2Ah | 123Ah | Nominal Module Capacity | 129.6Ah | 126Ah |
| 29.4V | 29.4V | Max Module Voltage | 29.4V | 29.4V |
| 25.7V | 25.4V | Nominal Module Voltage | 25.41V | 25.2V |
| 17.5V | 17.5V | Minimum Module Voltage | 17.5V | 18.55V |
| Undefined | 24.12A | Max Discharge Current -30C - -20C | 24.12A | Undefined |
| 360A | 36A | Max Discharge Current -20C - 5C | 36A | 288A |
| 360A | 180A | Max Discharge Current 5C - 45C | 180A | 468A |
| 360A | 180A | Max Discharge Current 45 - 60C | 180A | Undefined |
| 36A | 36A | Max Charge Current 0C - 24C | 36A | 72A |
| 111.6A | 83.88A | Max Charge Current 25C - 50C | 83.88A | 61.2A |
Module Info
These are easy to handle 24V battery modules built using one of the four types of 18650 cells above. The ribbon cable is held on by bolts, removing it and adding your own BMS harness with ring terminals will be easy. It is possible to break it down into smaller groups in series, but it looks like the end pieces are unique, so if you break it down to 6s or 5s, you might not have an easy way of assembling the remaining components into a separate module. There are gaps in between the cells for air cooling. Incorporating air cooling into your own build will be easy if you intend to use them under high currents. The modules interlock with each other in a sliding action to create a sturdy complete pack if you are planning on buying multiple of this item and use them as is. We also have a busbar that we could provide upon request that will series together modules.
For Cell Harvesters
The 18650 cells are NOT welded, disassembly is extremely easy. The cells are compressed and spring loaded through a patented design. One purchaser has made a very detailed breakdown of this module that you will find very useful. You can find it here.
Module Specifications:
Module Configuration: 36p7s
Length: 19 1/2"
Width: 3"
Height: 8 1/2"
Weight: 30.3lbs
Shawn (verified owner) –
Batteries all tested above 80% capacity with proper IR module is a little rough to take apart not bad had shrink wrap most but at the price you end up pretty good disassembled module to make ebike batteries
Adrian levy (verified owner) –
These cell have become the most cost-effective low-cost option for my customers, coupled with a reputable BMS they work equally well on 24volts 7s and series stacked to 48 volts 14s no problems. Low cost systems Renewable systems designed with these stacks revealed that a 48 volt twin stacked will achieve full energy delivery at 6kWh no problems for loads not exceeding 1kw sustained. This is so because not a single unit 18650 cell in the stack will not exceed their coulombic rate (C rate). This is the key reason for their effectiveness. A true value for money
nicholas r –
items as described thanks
Jacob Batterman (verified owner) –
Spot tested 20 cells from the pack I bought. All are voltage balanced and measuring around 3.2Ah under a 1A load. The cells are glued into the holders so the sleeves will rip when you remove them, but there are no welded nickel stips to deal with. Very impressed with the communication, packaging, and pricing of Greentec. I will be using them as my battery supplier whenever possible henceforth.